Automation
Embedded “Digiceiver” Automation Control
If your network is delivered via the Digiceiver you can access the imbedded automation signaling with the ICP Remote Switch Closure Module (Part No. 100368). The closure module is provided with your receiver. The user interface to the module is a 37-pin female Type “D” connector. The module closure outputs are provided by optically isolated MOSFET’s, which provide interface ratings similar to standard reed relays. The output may be used in the same way that a set of normally open contacts would be used. Upon the proper signal from the network the Closure Module output will pulse closed for 500ms.
In most Digiceiver automation configurations a time sync pulse is provided for your use at precise times every hour. The time sync pulse will trigger at :13:00, :28:00, and :43:00 past the hour.
News Networks
- Missourinet Closure Information
- Nebraska Radio Network Closure Information
- Radio Iowa Closure Information
- S.Carolina Radio Network Closure Information
- Wisconsin Radio Network Closure Information
Agriculture Networks
- Brownfield Iowa Closure Information
- Brownfield Illinois Closure Information
- Brownfield Indiana Closure Information
- Brownfield Missouri Closure Information
- Brownfield Nebraska Closure Information
- Brownfield Wisconsin Closure Information
Sports Networks – Distributed via Learfield DCR-974 (Digiceiver)
- Indiana Hoosier Closure Information
- Iowa Hawkeyes Closure Information
- Iowa State Cyclones Closure Information
- Missouri Tigers Closure Information
- North Carolina Tar Heels Closure Information
- Oklahoma Sooners Closure Information
- Oklahoma State Cowboys Closure Information
- Purdue Boilermakers Closure Information
- Wisconsin Badgers (FB/BB) Closure Information
- Wisconsin Badgers (HOCKEY) Closure Information
Comments on this entry are closed.